 |
 |
|
|
Sanitizers & Chlorinators
Kills Bacteria and Germs While Helping Prevent Algae
Your pool stays fresh and clean with HTH® Stabilizers and Chlorinators, designed to effectively guard against bacteria, algae, and other organisms. HTH® Chlorinators are one of the most widely used chlorinators in backyard and residential pools for one simple reason – they keep your pool clean.
>> Add to Supply List |
|
Dual Action Chlorinating Tablets
This slow-dissolving, long-lasting stabilized chlorinator kills bacteria, controls algae and protects your pool's chlorine from sunlight degradation.
Application
• Typically used in a feeder. May also be used in a skimmer or floater.
• Feed rates will depend upon the feeder size, setting, and model.
• Be sure to follow instructions given with each feeder
• May last longer in a floater than in a feeder due to less water agitation.
Useful Tips
• Use an HTH® Test Kit or Test Strips to test chlorine and pH levels
twice a week.
• Shock-treat at least once a week using HTH® Shock 'N Swim or HTH® Super
Shock 'N Swim.
|
>> Add to Supply List |
|
3-in-1 Chlorinating Skimmer Tablets
HTH® 3-in-1 Chlorinating Skimmer Tablets are a slow dissolving product that is easy and convenient to use. This product controls algae, kills bacteria and destroys organic contaminants.
Application
• These tablets are designed to be used in the skimmer basket and dissolve
slowly (up to 1 week) providing a steady source of available chlorine for
complete swimming enjoyment in your pool.
• DO NOT MIX with any other types of chlorinating compounds.
Useful Tips
• Ensure your filtration system operates at least 10 hours per day during
summer.
|
>> Add to Supply List |
|
Chlorinating Granules
A buffered chlorinator that provides effective, reliable chlorination economically. It can be used as routine daily maintenance or as a shock treatment.
Application
• Broadcast the product evenly over a wide area in the deepest part of the
pool.
• Throughout the pool season adjust pH to 7.2 – 7.8.
• Add 8 to 11 oz. per 10,000 gallons daily or as often as needed to maintain
chlorine residual at 1 – 4 ppm.
Useful Tips
• Use an HTH® Test Kit or Test Strips to test chlorine and pH levels
twice a week.
• For best results add granules in the late afternoon or evening. When
adding granules always broadcast at the deepest end of the pool while the
water is circulating.
|
| |
