We offer a choice of wood protection and enhancement products with a wide range of dilution ratios, giving you the flexibility to use them in a variety of applications. Please contact an Arch Wood Protection representative for assistance in choosing the best product for your particular needs.
AntiBlu® XP-Quattro
This is the latest offering in AntiBlu® surface treatments. A corrosion inhibitor is added to the proven combination of four mold and sapstain fungicides, resulting in a cost-effective treatment. For more information, click here (PDF).
AntiBlu® XP64
AntiBlu XP64 is a highly concentrated formulation which combines four active ingredients. AntiBlu XP64 controls sapstain and mold in freshly sawn and seasoned wood and wood products. For more information click here (PDF).
AntiBlu® F2
Registered by both EPA and Canada's PMRA, AntiBlu F2 is ideally suited to conditions and species found in the northwestern U.S. and Canada. Recent enhancements to the formulation include new surfactants that provide better cold weather stability. For more information click here (PDF).
AntiBlu® IP75
This product contains two active ingredients, and like the other products in the AntiBlu® line, it can be used on lumber, as well as plywood, particleboard, OSB, and wood composite structural components. Does not contain quaternary ammonium compounds. For more information click here (PDF).
AntiBlu® Blitz
This amine oxide formulation is a performance enhancer for wood preservative products.
AntiBlu® MC-30
Developed to provide robust control of sapstain and mold over a longer time period than typical of other products, AntiBlu MC-30 works well in acidic environments. Applied by immersion in a dip tank, it works on mixed hardwoods, as well as spruce, pine, and fir. For more information, click here (PDF).
Defoamer
Only small amounts are required to keep foam from vibro screens, return lines, agitators and other areas that commonly generate foam.
Arch® H2O Water Block
Available in both concentrate and ready-to-use formulations, H2O Water Block is a silicone sealer containing a blend of components that provide waterproofing for a wide variety of substrates. For more information click here (PDF).
AntiBlu® F-40 (Chlorothalonil)
Used to prevent deterioration and discoloration caused by fungi and mildew, chlorothalonil has proven itself as a long-term mold preventative. It prevents the growth of multiple species of mold, while remaining very stable in solution and on lumber. For more information click here (PDF).
K-18500
For mold control in freshly sawn wood and wood composites.
AntiBlu® Brightener
Formulated to reduce iron marks and to effectively brighten lumber for extended periods of time.
AntiBlu® Brightener 25/75
This lumber brightener, used in dip tanks and spray systems with high iron content in the solution, effectively reduces iron marks on wood.
AntiBlu® Pernambuco™ Stain
A line of waterborne pre-stain concentrates developed specifically for pressure-treated wood, both green and kiln-dried. For more information, click here (PDF).
Borate Additives
Long recognized as effective against wood-destroying organisms, borates diffuse through wood to prevent termite attack.
IPBC 20 & IPBC 40
Broad spectrum fungicide additives used in both architectural coatings and construction applications.
P-37 Insecticide
A widely used and effective liquid insecticide that protects lumber and logs against wood-destroying insects.
